by Martyn | Apr 22, 2015 | Design, Electrical, Native Watercraft, Slayer
I have just finished prototyping a new transducer mount that fits in the scuppers under the seat on the Slayer 13. I decided this was a perfect time to finally fit up my sounder and battery mount. The scupper mount has a plastic bash plate that is pulled up against...
by Martyn | Apr 2, 2015 | Design, Native Watercraft, Slayer
Over the past couple of days I have finished off the install on John’s Slayer 10. I started by making an aluminium mount for the structure scan receiver to go in the front hatch of the kayak. I also made a stainless plate to bolt to a starport to...
by Martyn | Mar 31, 2015 | Design, Design and Products, Native Watercraft, Slayer
John from Ebb Tide and myself have recently been working on fitting out some new parts to his Slayer 10. I started with the install of the sounder. Because of the length of the structure scan transducer I decided to hang it over the back. I utilized a...
by Martyn | Mar 22, 2015 | Design, Native Watercraft, Rudder, Slayer
After my trip away to Wingan Inlet and having to do 21 point turns in the river to change direction, it was definitely time to look at upgrading the rudder on the Slayer 13. There are a few different options for upgrading the rudder currently which are...
by Martyn | Mar 17, 2015 | Design, Native Watercraft, Slayer
Over the past months I have been fishing out of a Slayer 13, I have been working on alternatives to mounting the electronics and other tackle than what is currently available. The first part I produced was a twin battery holder that replaces the front hatch. This can...
