BerleyPro Guardian Transducer Protector – Suits Lowrance, Garmin and Raymarine

$34.00

In stock (can be backordered)

SKU: BP2614 Category: Tags: , , , , , , ,

Description

Don’t stress about forgetting to pull up the transducer cord, impacts from the side or even rear when loading and unloading anymore. We’ve made an ABS plastic cover to protect your expensive transducer. This is designed with speed in mind by having a V – point on the cover to help it break through the water. The sides are also angled so if you do impact something it will ride over the cover instead of the transducer!

This product is made to suit Hobie® kayaks fitted with the Guardian transducer mount, This is on 2019 Pro Angler 14s and Outback kayaks.

The side imaging, down imaging and sonar all shoot clearly through the abs cover.

We have incorporated 3 large drain holes to allow sand and debris to be washed through.

This suits the following transducers..

Lowrance – TotalScan
Lowrance – 3-in-1 Active imaging
Lowrance – 3D Structure scan
Lowrance – LSS2
Lowrance – Tripleshot

Garmin – GT52/CV52
Garmin – GT51/CV51
Garmin – GT40

Raymarine – RV100
Raymarine – HV100

Customer Reviews

4.8 Based on 9 Reviews
5 ★
89% 
8
4 ★
0% 
0
3 ★
11% 
1
2 ★
0% 
0
1 ★
0% 
0
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
BM
08/07/2019
Brian M.
AU AU

The service from Berleypro is

The service from Berleypro is absolutely fantastic, unfortunately I ordered the wrong product and had to send it back for a refund. I will be reordering the right one after Berleypro sent me a link to the one I need for my transducer... thank you Berleypro , great service :+1::+1::+1:

MJ
06/02/2019
Milan J.
HR HR

I'm satisfied with Your product,

I'm satisfied with Your product, but I will be happy if You produce Guardian Transducer Protector for outside mounting Transducer with Bracket Mont Plate, because that's my case. I need to protect my Transducer, so, I have cut back side of Guardian to have access capability to mount on the Transom Mount Plate. So if You can produce this type of Guardian let me know. Thank You. Best regards, Milan Jutriša.

AS
05/01/2019
Anthony S.
AU AU

Had a simple postage question,

Had a simple postage question, never got back to me - little disappointing.

05/01/2019
BerleyPro

Hi Anthony, What was the postage question thanks? Feel free to email me at martyn@berleypro.com