Destination Installation

 

BerleyPro Orb Light Installation

This guide is on how to install the BerleyPro Orb Light onto your kayak. This one is installed onto the rear hatch of a Hobie® Outback. I would recommend putting this onto the kayak directly behind the seat to one side normally but this is where the owner wanted this....

Hobie Compass Seat Risers Installation

We designed these seat risers not to give you a massive lift in height but to be able to make use of the space under the seat by being able to put tackle boxes, anchors and more under there. These risers lift your seat 19mm (3/4 inch). The seat riser kit comes with 4...

Slayer Seat Risers

This post shows how you can quickly install our 2 inch (50mm) seat risers on your Native Watercraft Slayer 10, 13 or Manta Ray Propel. The seat risers have the following benefits.  Improved pedaling angle More storage under seat Easier to stand and sit down Raised...

How to look after your electronics on your kayak

Corrosion... Snapped Terminals... Broken Fish Finders... Costly Repairs... We've all been there. Everyone will tell you electronics shouldn't be used on a kayak, but why would you go fishing without knowing what's in the water around you?! I've personally been through...

Nocqua Battery in a Hobie Pro Angler

We've just made a new bracket to mount Nocqua Batteries onto the sailing mast mount on Hobie kayaks. These batteries can easily be installed onto the mount by using the velcro strap on the rear of the battery.   The mount has a larger body so removing the battery...