BerleyPro Garmin SideVu Ready Transducer Mount (Suits Hobie®)

$69.00

The ultimate transducer mount to use your Garmin SideVu fishfinder/graph on your Hobie kayak. This transducer mount keeps your transducer directly under you giving you the best sidescan image and no extra drag and lost speed from having your transducer hanging down to one side.

In stock

Warehouse

AUSSIE AND USA STOCK

Same Day Dispatch

SAME DAY DISPATCH

60 Day Returns

60 DAY RETURNS

Worldwide Shipping

WORLDWIDE SHIPPING

The Garmin SideVu transducer mount is designed to fit in the existing Lowrance Ready location on the base of Hobie® kayaks. This product will mount and cover the SideVu transducers which come with the Garmin range providing protection and also maintaining a crisp image with SideVu and DownVu. The ABS plastic is designed to protect the transducer from the scratching and damage which comes with normal kayak use.

This product will mount and cover the following Garmin transducers:

 

Benefits of this transducer mount:

  • Made from 3mm Thermoformed plastic to provide a tough protective cover for your expensive transducer
  • Easy installation
  • Accurate water temp
  • Great Sidescan and Downscan image with no noticeable degradation

 

Comes with stainless steel fasteners.

 

Please note: This mount will sit below the base of your Hobie kayak. It is not designed to carry the weight of your kayak while you are driving so please ensure you prop up the sides with something so it doesn’t cause damage around the screws and brass inserts.

Customer Reviews

4.9 Based on 26 Reviews
5 ★
92% 
24
4 ★
4% 
1
3 ★
4% 
1
2 ★
0% 
0
1 ★
0% 
0
Customer Photos
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
01/23/2024

One of a kind!

I own a Hobie Compass and spent a loooooong time researching which fishfinder to get, finally landing on a Garmin with a transducer that supports side scanning. But… the space built into the Compass is internal, so that would nix the side scanning capabilities. After spending another looooong time researching options online and coming up empty, the BerleyPro mount wasn’t just the obvious choice, it was the only one that would fit the transducer space on my yak. It was easy to install, reasonably priced, and I know it will last a long time! I also own a keel guard from BerleyPro and there’s barely a scuff on it, and I use that guard to my advantage a lot! So if you have a Hobie with the Lowrance-ready transducer space and want to use it for a Garmin side scanning transducer, look no further! This is it! I will say that since the mount sticks out - which obviously is necessary for side scanning - I built a PVC rig to transport my yak in my truck so there isn’t any pressure on the mount or the hull. Worth the investment of time and energy!

11/21/2023

Transducer mount

The unit was not a perfect fit. Did not fit the impression on my hobie outback perfectly. It was ordered correctly as verified by customer service. I am using it and my garmin unit is working with it.

03/04/2023

Nice Side View Garmin Mount

I really like the mount and so far I’ve had no issues loading or unloading my kayak with the mount installed.

11/21/2022

BerleyPro Garmin SideVu Ready Transducer Mount for a Hobie Revo 13

After trying a transducer arm I realized that I should have purchased the Berleypro transducer mount from the start. I spoke to Martin through email and he answered my questions. I no longer have to worry about snagged lines or cleaning off seaweed. I'm very pleased with the preformance of the mount. It was easy to attach with clear instructions. I get a clear signal and have no issues. I would recommend this product and company for cost and service.

BerleyPro BerleyPro Garmin SideVu Ready Transducer Mount (Suits Hobie®) Review
06/19/2022

Hollow plastic or solid aluminum?

The Berleypro rails weigh a bit more than 3 times the stock Hobie inserts. The BP inserts are secured with nuts and washers versus just screws for Hobie. My RAM mount and Yakattack mounts slide on and off the BP inserts easily, but most importantly, they tighten down securely. There is no flex to the track from my omega pro rod holder when it is under load from a fish. Did I mention they look great too?

BerleyPro BerleyPro Garmin SideVu Ready Transducer Mount (Suits Hobie®) ReviewBerleyPro BerleyPro Garmin SideVu Ready Transducer Mount (Suits Hobie®) Review
06/19/2022

Nice and simple

It is a nice simple up grade to the somewhat flimsy plastic rails Hobie rails. I like the finish and the thru-bolting which they supply (more comforting than screws into plastic). The rail is an exact fit whit the rails from straight extrusion and the OG with a slight bend. One change I would make to the extrusion is to increase the depth of the sliding opening to accommodate more types of T nuts. Otherwise a nice upgrade that would see your beloved rod flying off into the deep.