by Martyn | Sep 27, 2019 | Destination Installation, Hobie
We’ve just made a new bracket to mount Nocqua Batteries onto the sailing mast mount on Hobie kayaks. These batteries can easily be installed onto the mount by using the velcro strap on the rear of the battery. The mount has a larger body so removing the...
by Martyn | Nov 29, 2018 | Destination Installation, Hobie
I’ve put together this blog to show you how to install the Active Imagining 3-in-1 transducer from Lowrance on your Hobie kayak in the Lowrance ready position. We are using the BerleyPro adaptor and powering this with 2 17.5ah FPV Lithium batteries. ...
by Martyn | Oct 10, 2018 | Hobie
Now that snapper season is here and I’ve done some kms (kilos, 1.6 km per mile, maybe done around 3 total…)… I’ve owned this Hobie Compass I got from SLHobie for nearly 1 year and here’s a run down of the things I have fit it out with and...
by Martyn | Mar 25, 2018 | Destination Installation, Hobie, Lowrance
We’ve got the new Lowrance TripleShot Ready Transducer Mount that suits Hobie kayaks finished and have teamed up with Paul from Paul Malov Fishing to install the new mount and do some testing on Vic Bream Installation is fairly straight forward and can be done...
by Martyn | Feb 5, 2017 | Destination Installation, Hobie, Lowrance
With the technology increasing everyday with fish finder electronics, Lowrance has released the new StructureScan 3d transducers. Unfortunately these transducers do not fit with our existing TotalScan ready transducer mounts so it was time for a new one. This new...
by Martyn | Jun 11, 2016 | Destination Installation, Hobie, Lowrance, Mulloway
Firstly a massive thanks to Alex Whitehead and Paul Malov, we seem to have been able to pull off an interstate project in just over a week and ready for on the water testing! The total scan transducer bolts up to the existing location and uses the two plastic mounts...
